Premium 3 Inch Resin Polishing Pads for Concrete Polishing RP-02
Premium 3 inch resin polishing pads for concrete polishing RP-02 has 12mm thickness which provide longer working lifespan then typhoon type. There are four steps of polishing process we usually work with resin pads.
Step one usually process at 50-100 grit, it produces a even and dull shine surface. We can usually achieve this by stopping the polishing process at or below 100 grit.
Step two is able to make some good shine during this phase, we can start to see the reflective in the concrete. It usually process at 200-400 grit. It’s kind of a good result for polished concrete.
Step three will process at 800-1500 grit and create a much higher shine coating compared to step two and also has much more clear reflective to the ceiling and walls.
Step four is deep polished to provide a very high shine surface with utter reflection. The concrete surface will be looked like wet while seen from everywhere. Step four will be processed to 3000 grit using resin polishing pucks or burnishing pads.